Reflective Heat-Transfer Film

Reflective heat-transfer film is used for producing reflective heat-applied graphics and logos.

If you have a plotter or a laser cutting machine capable of cutting this type of film, you can order reflective film from us at a very competitive price.

We supply the film in rolls of 0.5 × 50 m. If required, rolls can also be supplied in 1 × 50 m format, depending on your equipment.

Our heat-transfer film includes an additional adhesive layer that simplifies weeding and prevents cut thermo-logos from lifting or crumbling during transportation.

However, we know that certain fabrics (for example very light fabrics, laminated PVC, etc.) may not perform well with this additional adhesive layer, as it can sometimes leave marks when the thermo-logo is applied.

For this reason, we can supply both types of film:
- with an additional adhesive layer
- without the additional adhesive layer
If you would like to test the material, we will gladly send samples for evaluation.

Standard colors typically available in stock:
- gray
- rainbow
- black
- white
Custom colors can be produced upon request.

We also supply SEGMENTED reflective heat-transfer film in tape format with pre-designed patterns such as:
- herringbone
- fence pattern
- bracket pattern
- and others

Widths available: 3 cm, 4 cm, and 5 cm.
Minimum order: 4 rolls.
Each roll contains 100 meters.

Reflective heat transfer logos per your design may be supplied for sure!

IMPORTANT NOTE:
If no type of heat-transfer film adheres properly to your fabric and you are unsure how to resolve the issue, send us samples of your fabric (A4 size is sufficient). We will forward them to our factory, conduct tests, and determine the exact type of film and application parameters required for your material.

We have done this many times before, with excellent results.